WIWA INJECT 2K 333 GX

  • Quick start-up, easy maintenance, easy and quick cleaning
  • Long hose lengths can be adapted
  • Large output volume

Product description

The WIWA INJECT 333 GX is a 2-component piston pump with positively controlled and interchangeable mixing ratio. Due to the positive control and the always same switching points, you get the perfect dosage. Excellent for use on large construction sites, in tunnels and underground. It is strongly characterized by a high delivery rate. In addition to the standard mixing ratio of 1:1, over 100 other mixing ratios are possible by replacing the material pumps. Watery and low viscosity materials as well as high viscosity materials are no problem.

  • Quick start-up, easy maintenance, easy and quick cleaning
  • Long hose lengths can be adapted
  • Large conveying volume
  • Large material inlets and check valves for viscous materials
  • Low wear due to fixed packings
  • Wide range of different suction systems configurable

Technical data

ModelINJECT 333037
Pressure ratio37:1
Output per cycle536 ccm
Max. inbound air pressure8 bar
Max. operating pressure296 bar
Mixing ratio1:1
Order numbers
N/G0669706
N/F0669705
RS/G0670129
RS/F0670146
ModelINJECT 333018
Pressure ratio18:1
Output per cycle1100 ccm
Max. inbound air pressure8 bar
Max. operating pressure144 bar
Mixing ratio1:1
Order number
RS/G0669707
N - Normal steel galvanized, not stainless, R - stainless, RS - Stainless steel, rust and acid resistant.
B - On container, D - on tripod, F - on chassis, G - on rack, GZ - With feed funnel, W - on wall mount.
ASL - suction tube, DAS - Direct suction.

The WIWA INJECT 333 GX is a 2-component piston pump with positively controlled and interchangeable mixing ratio. Due to the positive control and the always same switching points, you get the perfect dosage. Excellent for use on large construction sites, in tunnels and underground. It is strongly characterized by a high delivery rate. In addition to the standard mixing ratio of 1:1, over 100 other mixing ratios are possible by replacing the material pumps. Watery and low viscosity materials as well as high viscosity materials are no problem.

  • Quick start-up, easy maintenance, easy and quick cleaning
  • Long hose lengths can be adapted
  • Large conveying volume
  • Large material inlets and check valves for viscous materials
  • Low wear due to fixed packings
  • Wide range of different suction systems configurable

ModelINJECT 333037
Pressure ratio37:1
Output per cycle536 ccm
Max. inbound air pressure8 bar
Max. operating pressure296 bar
Mixing ratio1:1
Order numbers
N/G0669706
N/F0669705
RS/G0670129
RS/F0670146
ModelINJECT 333018
Pressure ratio18:1
Output per cycle1100 ccm
Max. inbound air pressure8 bar
Max. operating pressure144 bar
Mixing ratio1:1
Order number
RS/G0669707
N - Normal steel galvanized, not stainless, R - stainless, RS - Stainless steel, rust and acid resistant.
B - On container, D - on tripod, F - on chassis, G - on rack, GZ - With feed funnel, W - on wall mount.
ASL - suction tube, DAS - Direct suction.