WIWA INJECT 2K 333 GX
- Large output volume
- Long hose lengths can be adapted
- Quick start-up, easy maintenance, easy and quick cleaning
Description
The WIWA INJECT 333 GX is a 2K piston pump with interchangeable mixing ratio. Due to the positive control and the always same switching points, you get the perfect dosage. Excellent for use on large construction sites, in tunnels and underground. It is strongly characterized by a high delivery rate. In addition to the standard mixing ratio of 1:1, over 100 other mixing ratios are possible by replacing the material pumps. Watery and low viscosity materials as well as high viscosity materials are no problem.
Suitable accessories
Technical Data
| Model | INJECT 333037 |
| Pressure ratio | 37:1 |
| Output per cycle | 536 ccm |
| Max. inbound air pressure | 8 bar |
| Max. operating pressure | 296 bar |
| Mixing ratio | 1:1 |
| Order numbers | |
| N/G | 0669706 |
| N/F | 0669705 |
| RS/G | 0670129 |
| RS/F | 0670146 |
| Model | INJECT 333018 |
| Pressure ratio | 18:1 |
| Output per cycle | 1100 ccm |
| Max. inbound air pressure | 8 bar |
| Max. operating pressure | 144 bar |
| Mixing ratio | 1:1 |
| Order number | |
| RS/G | 0669707 |
B - On container, D - on tripod, F - on chassis, G - on rack, GZ - On Rack with feed funnel, W - on wall mount,
ASL - suction tube, DAS - Direct suction
The WIWA INJECT 333 GX is a 2K piston pump with interchangeable mixing ratio. Due to the positive control and the always same switching points, you get the perfect dosage. Excellent for use on large construction sites, in tunnels and underground. It is strongly characterized by a high delivery rate. In addition to the standard mixing ratio of 1:1, over 100 other mixing ratios are possible by replacing the material pumps. Watery and low viscosity materials as well as high viscosity materials are no problem.
Suitable accessories
| Model | INJECT 333037 |
| Pressure ratio | 37:1 |
| Output per cycle | 536 ccm |
| Max. inbound air pressure | 8 bar |
| Max. operating pressure | 296 bar |
| Mixing ratio | 1:1 |
| Order numbers | |
| N/G | 0669706 |
| N/F | 0669705 |
| RS/G | 0670129 |
| RS/F | 0670146 |
| Model | INJECT 333018 |
| Pressure ratio | 18:1 |
| Output per cycle | 1100 ccm |
| Max. inbound air pressure | 8 bar |
| Max. operating pressure | 144 bar |
| Mixing ratio | 1:1 |
| Order number | |
| RS/G | 0669707 |
B - On container, D - on tripod, F - on chassis, G - on rack, GZ - On Rack with feed funnel, W - on wall mount,
ASL - suction tube, DAS - Direct suction
GmbH & Co.KG
Gewerbestrasse 1-3
35633 Lahnau Germany