WIWA DOSYS M

  • Simple operation
  • Hazardous location rated (no electronics, purely pneumatic control)
  • Precise conveying at the push of a button even of the smallest quantities
Brochure

Description

Small quantities efficiently dosed with the WIWA DOSYS M.

If fillers, adhesives or sealants are mixed by hand, there is a risk that air will be stirred in. The resulting bubbles in the surface would then have to be compensated by further layers of material - a time and cost factor. In addition, the final result can vary depending on the day and the user.


With the small, mobile WIWA DOSYS M, bubble-free mixing with a constant mixing ratio is guaranteed, thus ensuring the consistent quality of the job. In addition, the removal from containers of different sizes makes it an environmentally friendly and cost-saving partner for any task. Smallest quantities, even of a few milliliters, are the special target area of the user-friendly system, because for selective applications it can even be stopped in the middle of the stroke to provide the exact quantity required.

Technical Data

Output per cycle424.71 ccm
Max. inbound air pressure6 bar
Max. operating pressure34 bar
Mixing ratio100:3
Order number0666910
Output per cycle317.51 ccm
Max. inbound air pressure6 bar
Max. operating pressure63.6 bar
Mixing ratio100:10
Order number0669960
Output per cycle618.51 ccm
Max. inbound air pressure6 bar
Max. operating pressure23.8 bar
Mixing ratio100:50
Order number0667905
Output per cycle824.68 ccm
Max. inbound air pressure6 bar
Max. operating pressure18 bar
Mixing ratio100:100
Order number0666500
N - Normal steel galvanized, not stainless, R - stainless, RS - Stainless steel, rust and acid resistant,
B - On container, D - on tripod, F - on chassis, G - on rack, GZ - On Rack with feed funnel, W - on wall mount,
ASL - suction tube, DAS - Direct suction

Fields Of Application

  • Railcar construction
  • Machine and vehicle construction
  • Herstellung Maschinenbetten
  • Industrial bonding
  • Spot dosing of rather small material quantities (e.g. cartridge filling)

Materials

  • Filler materials based on epoxy resin, polyurethane or peroxide
  • Adhesives
  • Sealants
  • Thickeners
  • Mastics
  • Insulating materials

Small quantities efficiently dosed with the WIWA DOSYS M.

If fillers, adhesives or sealants are mixed by hand, there is a risk that air will be stirred in. The resulting bubbles in the surface would then have to be compensated by further layers of material - a time and cost factor. In addition, the final result can vary depending on the day and the user.


With the small, mobile WIWA DOSYS M, bubble-free mixing with a constant mixing ratio is guaranteed, thus ensuring the consistent quality of the job. In addition, the removal from containers of different sizes makes it an environmentally friendly and cost-saving partner for any task. Smallest quantities, even of a few milliliters, are the special target area of the user-friendly system, because for selective applications it can even be stopped in the middle of the stroke to provide the exact quantity required.

Output per cycle424.71 ccm
Max. inbound air pressure6 bar
Max. operating pressure34 bar
Mixing ratio100:3
Order number0666910
Output per cycle317.51 ccm
Max. inbound air pressure6 bar
Max. operating pressure63.6 bar
Mixing ratio100:10
Order number0669960
Output per cycle618.51 ccm
Max. inbound air pressure6 bar
Max. operating pressure23.8 bar
Mixing ratio100:50
Order number0667905
Output per cycle824.68 ccm
Max. inbound air pressure6 bar
Max. operating pressure18 bar
Mixing ratio100:100
Order number0666500
N - Normal steel galvanized, not stainless, R - stainless, RS - Stainless steel, rust and acid resistant,
B - On container, D - on tripod, F - on chassis, G - on rack, GZ - On Rack with feed funnel, W - on wall mount,
ASL - suction tube, DAS - Direct suction

Fields Of Application

  • Railcar construction
  • Machine and vehicle construction
  • Herstellung Maschinenbetten
  • Industrial bonding
  • Spot dosing of rather small material quantities (e.g. cartridge filling)

Materials

  • Filler materials based on epoxy resin, polyurethane or peroxide
  • Adhesives
  • Sealants
  • Thickeners
  • Mastics
  • Insulating materials

These products may also interest you.